How UV Light Measurement Enhances Safety and Efficiency

How UV Light Measurement Enhances Safety and Efficiency

Ultraviolet (UV) light is a radiant energy that the naked eye cannot see. Although UV light has valuable purposes, including water purification and drying inks, it causes ill effects such as skin cancer and eye deterioration, particularly when exposed to excessive amounts of UV radiation. This is why the measurement of UV light becomes vital across different sectors and conditions. Therefore, considering procedures and methods of evaluating UV light and its strength will guarantee protection and effectiveness in using this kind of light.

Understanding the UV Spectrum

UV stands for ultraviolet, a wavelength just above visible light and below X-rays. It's further divided into three main categories:

  • UVA (315 nm—400 nm): This is the most prolonged and least penetrative of the three types of UV light. It goes beyond the skin's surface and is the leading cause of early ageing.
  • UVB (280 nm—315 nm): This type of ultraviolet radiation causes sunburn and contributes to skin cancer.
  • UVC (200 nm—280 nm): This kind of UV light is the most dangerous because it has the shortest range of waves and the highest energy. Fortunately, the ozone layer neutralises it and cannot reach the Earth’s surface in large quantities. However, the use of UVC light is common in germicidal purposes to eliminate microorganisms on surfaces.

They enable us to quantify the levels of UV light to identify the particular kind of radiation and portion of UV to cover. This information is vital for various purposes:

  • Protecting workers: UV measurement in areas where UV light is used for purposes such as curing or printing guarantees that exposed workers are not in contact with dangerous levels of UV. Frequent measurement enables the proper utilisation of protective clothing and evaluation of exposure time.
  • Optimizing disinfection: UV light destroys bacterial growth on water, air, and surfaces. However, the dosage of UV light must be controlled to deliver adequate intensity to eradicate dangerous bacteria or viruses on different surfaces. When used at low concentrations, pathogens might be left alive, while when used at high concentrations, material will be damaged.
  • Ensuring product quality: UV light is used to cure adhesives, inks, and coatings used in industries such as automotive, medical, aerospace, and electronics. Accurate measurement of UV light optimises the curing process and eliminates defects or inconsistencies in the products. Overexposure can also be very dangerous to the product’s image.

How to Measure UV Light

Different specific instruments can measure UV light levels. It depends on the application and the type of UV light required for measurement as either UVA, UVB or UVC.

 

  • UV Radiometers: These handheld devices integrate and quantify the total energy per unit area (fluence) from a source. They are perfect for general security and surveillance of the workers, among other uses.
  • UV Spectroradiometers: These instruments, which have emerged more enhanced than radiometers, enable the determination of the UV spectrum over various ranges of wavelengths. This allows quantitative and qualitative analysis of the type and magnitude of UV radiation prevailing. Spectroradiometers are vital in advancing UV technologies through experimentation, understanding, and product application.
  • UV Dosimeters: These wearable devices track an individual’s UV levels throughout the day. They are beneficial for workers who are exposed to a high level of UV and for people who are concerned about their exposure to the sun.

Benefits of Regular UV Light Measurement

Regular UV light measurement offers numerous benefits:

  • Enhanced safety: UV monitoring helps workplaces adhere to safety measures and prevent exposing workers to high UV levels.
  • Improved efficiency: Accurate measurements help achieve the best results in terms of UV's bactericidal and curing effects without overshooting and wasting energy.
  • Quality control: The outcome of a specific level of UV exposure can be counted in a similar level of product quality in UV-sensitive manufacturing operations.
  • Cost savings: The costs of repairing overexposure damage and proactively maintaining proper disinfection minimise the need to redo or replace numerous items.
  • Informed decision-making: Measuring with UV light data decreases costs incurred due to timely UV lamp replacement and developing safety measures to ensure protection from the light.

Implementing a UV Light Measurement Program

Here's how to implement a UV light measurement program:

  • Identify needs: Find out which applications use UV light and what safety or efficiency problems may arise due to exposure to excessive or insufficient amounts of the product.
  • Choose the right instrument: Choose an appropriate UV meter depending on the type of UV light that needs to be measured and the level of sensibility.
  • Establish a measurement schedule: The frequency of the measurements depends on characteristics such as lamp type, usage currency and safety standards.
  • Train personnel: Educate staff in charge of determining the UV light intensity on the correct instrument use and how to analyse results and record them.
  • Analyze data and take action: Carefully evaluate the data consistently to determine if any problems may be present and address them through proper corrective measures, such as changing lamp exposure times or initiating extra safety precautions.

UV light measurement is a critical practice for offering safety and productivity across various application fields. Understanding the different kinds of UV light, how they can be measured, and what tools are available is the only way to use UV technology effectively while avoiding most of its potential pitfalls.

In addition to the points covered above, here are some additional considerations for a comprehensive UV light measurement program:

  • Calibration: Ensure accurate and reliable measurements by calibrating your several UV meters at least to the standards recommended by the manufacturer.
  • Data management: Establish a database to capture, sort and store UV measurement data. This also enables the identification of trends and arising issues to be flagged early enough and proves compliance with set regulations.
  • Documentation: Ensure documentation and filing of records on UV light measurement procedures, frequency of measurement, calibration, and any data analysis made. This helps maintain consistency and ease of conducting further audits of the books of account.
  • Continuous improvement: Another one is to revise and adapt the best practicable means of measuring UV light regularly following new technologies, regulations and standards.

Beyond Safety and Efficiency

While safety and efficiency are the primary benefits of UV light measurement, there are additional advantages to consider:

  • Environmental benefits: UV disinfection of water and air is effective but requires fewer chemicals than other disinfection methods, making the procedure more environmentally friendly.
  • Public health: UV disinfection also significantly prevents disease transmission, especially in healthcare facilities, thereby enhancing safety.
  • Consumer protection: Maintaining UV exposure in curing the products keeps the products' quality and safety constant, thus benefiting the customers.

Conclusion

UV light measurement plays a critical role in responsibly harnessing UV technology's power. By implementing a well-designed and well-maintained program, we can ensure the safety of workers and the public, optimise processes for efficiency, and contribute to a more sustainable future.

Remember: Consistent UV light measurement is an investment in safety, efficiency, and, ultimately, the success of UV-based applications across various industries.

Back to blog